Gauging interest among the group for a cost effective STC metal spinner assy for the fixed pitch sensenich crowd.
Initial target price for complete STC assy. is $1500 depending on number of members interested.
senesenich prop spinner
-
- Posts: 7
- Joined: Fri Nov 09, 2018 8:21 am
- Location: Fairbanks Alaska
- Contact:
- montana maule
- 100+ Posts
- Posts: 309
- Joined: Sun Sep 24, 2006 7:27 am
- Contact:
-
- Posts: 7
- Joined: Fri Nov 09, 2018 8:21 am
- Location: Fairbanks Alaska
- Contact:
-
- 100+ Posts
- Posts: 422
- Joined: Sun Feb 03, 2013 7:10 pm
- Contact:
Not too long ago I had the dreaded spinner crack and found the original supplier to Sensenich for the spinner and it's bulkheads. Very accommodating fellow who still had some new old stock that he graciously shiped me the parts I needed. I forwarded his contract information to Maule since he shired with me that he could and would run batches for Maule. So this issue is currently in Maule's power to resolve,I did a considerable amount of research on how they could provide support for our orphaned ( by Sensenich) prop / spinner sets. To date Maule has not stepped up to the plate to resolve this problem.
The best Government, is less Government.
-
- Posts: 19
- Joined: Mon Mar 02, 2015 11:32 am
- Location: Auckland, New Zealand
- Contact:
-
- 100+ Posts
- Posts: 1665
- Joined: Mon Feb 11, 2008 10:31 am
- Contact:
Is that why they dropped the -A 180HP models??montana maule wrote:If you fly the fixed pitch 160 hp or 180 hp it is only a matter of time until bulkheads crack. If you can get an STC that costs around $1500.00 I think you could fill a market need. You could also offer it to the factory and they would be able to produce the fixed pitch models again.
I am an AME in Richland, Washington. Please call for an appointment!
560 Gage Blvd.
Richland, WA 99352
(509) 628-2843
560 Gage Blvd.
Richland, WA 99352
(509) 628-2843
Who is online
Users browsing this forum: No registered users and 11 guests