Good morning,
I bought into a MXT-7-180 in mid-February. I have so far managed about seven hours in it and was hoping to do my first international trip in it in early April.
However, it has just gone unserviceable requiring a "muffler pilot side". I am trying to get a more technical definition but meanwhile, our mechanic is suggesting it must come from the USA (he has already tried having it welded).
Just in case he has missed anything, can anyone suggest please where in the UK, or at least mainland Europe, are good sources of Maule parts?
Thanks
Parts, UK / Mainland Europe
-
- Posts: 18
- Joined: Thu Jan 31, 2019 4:53 am
- Location: UK
- Contact:
- onfinal
- Posts: 49
- Joined: Tue Oct 13, 2015 3:14 pm
- Location: UK
- Contact:
Hi Joe,
I assume you are G reg.
When in need of spares I have imported direct from Maule USA. They are an awesome service and everything comes with a form 8130, most important for EASA reg. Contact Kasey or Duane in Maule parts. Ask them to ship Fedex Expedited and it will be with you in 4-5 days.
If you search on this site for 'mufflers' you will be returned some alternative sources for these parts which the USA guys use. Not used them myself so unsure if they are set up for export and EASA requirements.
Order and replace both sides, if one has gone the other might not be far behind. You don't want that to happen somewhere in Europe.
There is a gentleman in Germany, although for cost reasons I have used Maule USA.
I assume you are G reg.
When in need of spares I have imported direct from Maule USA. They are an awesome service and everything comes with a form 8130, most important for EASA reg. Contact Kasey or Duane in Maule parts. Ask them to ship Fedex Expedited and it will be with you in 4-5 days.
If you search on this site for 'mufflers' you will be returned some alternative sources for these parts which the USA guys use. Not used them myself so unsure if they are set up for export and EASA requirements.
Order and replace both sides, if one has gone the other might not be far behind. You don't want that to happen somewhere in Europe.
There is a gentleman in Germany, although for cost reasons I have used Maule USA.
M6-235
-
- 100+ Posts
- Posts: 421
- Joined: Sun Feb 03, 2013 7:10 pm
- Contact:
- andy
- Site Admin
- Posts: 1666
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
Lots of things could have caused the muffler problem. The flame trap inside the muffler might have deteriorated or come loose. The clamp that holds the muffler to the tailpipe might have corroded or broken. The aluminum shroud around the muffler might have cracked along the flange. If the flame trap is the problem, a new muffler is the most practical solution. Those things usually corrode to the point where repair isn't possible but Jeremy can advise you better on this.
Cracking along the shroud flange is common due to vibration. Use a couple of large stainless steel worm clamps screwed together around the middle of the shroud (or a larger single hose clamp) but don't tighten it too much. There are several good threads on this forum about it. Safety wire can also be used but I think the hose clamps are better. The shroud will have to be replaced if it's cracked but the hose clamp should prevent further cracking.
Cracking along the shroud flange is common due to vibration. Use a couple of large stainless steel worm clamps screwed together around the middle of the shroud (or a larger single hose clamp) but don't tighten it too much. There are several good threads on this forum about it. Safety wire can also be used but I think the hose clamps are better. The shroud will have to be replaced if it's cracked but the hose clamp should prevent further cracking.
Andy
1986 MX7-180
1986 MX7-180
-
- Posts: 18
- Joined: Thu Jan 31, 2019 4:53 am
- Location: UK
- Contact:
Thank you everybody. I have been talking with the famous Kasey and should have the order confirmd on Monday after she has seen a picture of the old part (she did not want to ship something across the Atlantic until certain which version). I am told by our mechanic that the part has been welded too many times to repair again and that we do not need a new shroud.
Kasey did suggest that I try first the European agent in Germany but his telephone number rang-out to unobtainable so I went back to the factory.
I will pass the fitting advice to our mechanic.
Thanks again everyone.
Kasey did suggest that I try first the European agent in Germany but his telephone number rang-out to unobtainable so I went back to the factory.
I will pass the fitting advice to our mechanic.
Thanks again everyone.
-
- Posts: 18
- Joined: Thu Jan 31, 2019 4:53 am
- Location: UK
- Contact:
Who is online
Users browsing this forum: No registered users and 76 guests