Static Port Location
- Andy Young
- 100+ Posts
- Posts: 1548
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
Static Port Location
Anybody happen to have a copy of the drawing that shows the dimensions for static port location? I measured mine before taking it apart, but it turns out that my static ports were installed in a non-standard location the last time it was re-covered. I’m contemplating putting them back in the factory-designated location.
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
- Andy Young
- 100+ Posts
- Posts: 1548
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
Re: Static Port Location
Thanks Andy,
Unfortunately, that drawing has had the dimensions removed. That seems to be the case with all drawings included in the Parts CD/Thumbdrive provided by Maule.
Unfortunately, that drawing has had the dimensions removed. That seems to be the case with all drawings included in the Parts CD/Thumbdrive provided by Maule.
-
- Posts: 49
- Joined: Fri Aug 17, 2018 7:14 pm
- Contact:
Re: Static Port Location
I pm'd you.
- Andy Young
- 100+ Posts
- Posts: 1548
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
Re: Static Port Location
Still need dimensions if anyone happens to have them.
-
- Posts: 80
- Joined: Fri Mar 06, 2020 12:48 pm
- Location: 98MO
- Contact:
Re: Static Port Location
Apparently the notes also... i wassent the thumbdrive around the ATP time, none of the drawings have the note callouts
-
- Posts: 21
- Joined: Sat Aug 09, 2014 8:04 pm
- Location: KFCM
- Contact:
- Andy Young
- 100+ Posts
- Posts: 1548
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
Re: Static Port Location
Thanks. That’s pretty close to where I ended up on the right. On the left, I went much higher, to clear the battery. This is shown as an optional placement on the Maule drawing.
- Duane
- 100+ Posts
- Posts: 762
- Joined: Mon Apr 07, 2008 1:58 pm
- Location: moultrie ga
- Contact:
Re: Static Port Location
Andy, pm me and I'll send you the full installation print. Our IT guy that did those DVD's took out some dimensions that should have been included. Don't blame him, that was a huge task to put those together and some things could be tweaked.
-
- Posts: 80
- Joined: Fri Mar 06, 2020 12:48 pm
- Location: 98MO
- Contact:
Re: Static Port Location
Yep he left out imortant referance notes on the copy i have
Who is online
Users browsing this forum: WitchesBoyToy and 19 guests