Static Port Location

Discussion on keeping your aircraft airworthy and legal and/or any technical topics.


Post Reply
User avatar
Andy Young
100+ Posts
Posts: 1545
Joined: Wed Oct 05, 2011 7:10 am
Location: Alaska, Antarctica, Colorado, and Others
Contact:

Static Port Location

Post by Andy Young »

Anybody happen to have a copy of the drawing that shows the dimensions for static port location? I measured mine before taking it apart, but it turns out that my static ports were installed in a non-standard location the last time it was re-covered. I’m contemplating putting them back in the factory-designated location.

User avatar
andy
Site Admin
Posts: 1662
Joined: Mon Aug 06, 2007 2:05 pm
Location: Lake James, NC, USA
Contact:

Re: Static Port Location

Post by andy »

Andy, here's drawing 6060F Rev. F if that helps.
Image
Andy
1986 MX7-180
Image

User avatar
Andy Young
100+ Posts
Posts: 1545
Joined: Wed Oct 05, 2011 7:10 am
Location: Alaska, Antarctica, Colorado, and Others
Contact:

Re: Static Port Location

Post by Andy Young »

Thanks Andy,

Unfortunately, that drawing has had the dimensions removed. That seems to be the case with all drawings included in the Parts CD/Thumbdrive provided by Maule.

johnmo61
Posts: 49
Joined: Fri Aug 17, 2018 7:14 pm
Contact:

Re: Static Port Location

Post by johnmo61 »

I pm'd you.

User avatar
Andy Young
100+ Posts
Posts: 1545
Joined: Wed Oct 05, 2011 7:10 am
Location: Alaska, Antarctica, Colorado, and Others
Contact:

Re: Static Port Location

Post by Andy Young »

Still need dimensions if anyone happens to have them.

Allparg
Posts: 80
Joined: Fri Mar 06, 2020 12:48 pm
Location: 98MO
Contact:

Re: Static Port Location

Post by Allparg »

Apparently the notes also... i wassent the thumbdrive around the ATP time, none of the drawings have the note callouts🤬

MnMauleFlyer
Posts: 21
Joined: Sat Aug 09, 2014 8:04 pm
Location: KFCM
Contact:

Re: Static Port Location

Post by MnMauleFlyer »

No drawing, but in the course of tearing mine down for re-cover I took a couple pics just from the passenger side. The other side was symmetric.

Image

Image

User avatar
Andy Young
100+ Posts
Posts: 1545
Joined: Wed Oct 05, 2011 7:10 am
Location: Alaska, Antarctica, Colorado, and Others
Contact:

Re: Static Port Location

Post by Andy Young »

Thanks. That’s pretty close to where I ended up on the right. On the left, I went much higher, to clear the battery. This is shown as an optional placement on the Maule drawing.

User avatar
Duane
100+ Posts
Posts: 762
Joined: Mon Apr 07, 2008 1:58 pm
Location: moultrie ga
Contact:

Re: Static Port Location

Post by Duane »

Andy, pm me and I'll send you the full installation print. Our IT guy that did those DVD's took out some dimensions that should have been included. Don't blame him, that was a huge task to put those together and some things could be tweaked.

Allparg
Posts: 80
Joined: Fri Mar 06, 2020 12:48 pm
Location: 98MO
Contact:

Re: Static Port Location

Post by Allparg »

Yep he left out imortant referance notes on the copy i have :( :(

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests