I need a front seat for my M4. Does anyone have one with a good frame they want to sell?
Thanks.
DAT
Front Seat
- DAT
- Posts: 30
- Joined: Fri Apr 24, 2009 2:59 pm
- Location: TN
- Contact:
Front Seat
Maule M4 220C
- Mog
- 100+ Posts
- Posts: 980
- Joined: Fri Nov 26, 2010 8:01 pm
- Location: Dallas, TX
- Contact:
- DAT
- Posts: 30
- Joined: Fri Apr 24, 2009 2:59 pm
- Location: TN
- Contact:
- Mog
- 100+ Posts
- Posts: 980
- Joined: Fri Nov 26, 2010 8:01 pm
- Location: Dallas, TX
- Contact:
-
- Posts: 37
- Joined: Wed Feb 14, 2007 12:22 pm
- Location: Scotland
- Contact:
- DAT
- Posts: 30
- Joined: Fri Apr 24, 2009 2:59 pm
- Location: TN
- Contact:
Thanks for the suggestions. I’ll get the seat cover and foam cushions off and see how it looks. The one area I can see has broken fiberglass on the seat pan near the area where the back is attached. The tubing is corroded in that area I could push a pointed screwdriver through it there.
I may have to order a new one if there are no used ones in decent condition .... we’ll see!
David
I may have to order a new one if there are no used ones in decent condition .... we’ll see!
David
Maule M4 220C
- DAT
- Posts: 30
- Joined: Fri Apr 24, 2009 2:59 pm
- Location: TN
- Contact:
I got the seat apart. The tubes were in good shape ... except the seat back tubes were broken at the joint on each side and the fiberglass pan was broken. We welded the seat back and re-fiberglassed the pan and it's as good as new. Wasn't a big deal at all. Thankfully!
I called the factory and they didn't have any seats made up. If they made one for me, the frame is about $500 and the pan is about $600. Glad I didn't need a new one!
I called the factory and they didn't have any seats made up. If they made one for me, the frame is about $500 and the pan is about $600. Glad I didn't need a new one!
Maule M4 220C
-
- 100+ Posts
- Posts: 735
- Joined: Tue Oct 17, 2006 3:07 pm
- Location: KGCY
- Contact:
Who is online
Users browsing this forum: No registered users and 27 guests