Vortex Generators, a how not to do it guide
- DAT
- Posts: 30
- Joined: Fri Apr 24, 2009 2:59 pm
- Location: TN
- Contact:
-
- 100+ Posts
- Posts: 187
- Joined: Sun Nov 15, 2009 5:19 pm
- Contact:
- Mog
- 100+ Posts
- Posts: 979
- Joined: Fri Nov 26, 2010 8:01 pm
- Location: Dallas, TX
- Contact:
- flyusn99
- 100+ Posts
- Posts: 120
- Joined: Sun Feb 09, 2014 8:20 pm
- Location: Juneau, Alaska
- Contact:
Read the manual and then realize the diagram is is a "Generic Maule Wing" meaning the outboard placement seam might not be where you think it is. If in doubt take a picture and have someone verify the proper placement of the templates BEFORE you start gluing.... Ask me how I know..... It seemed straight forward, so I thought...…
James
James
- crbnunit
- 100+ Posts
- Posts: 1890
- Joined: Tue Mar 18, 2008 12:42 pm
- Location: Alaska
- Contact:
-
- Posts: 14
- Joined: Sat Jul 22, 2017 6:35 am
- Location: Monroe, MI
- Contact:
- DAT
- Posts: 30
- Joined: Fri Apr 24, 2009 2:59 pm
- Location: TN
- Contact:
Neither the manual nor the alignment tool were in the box. I contacted Micro and sent them the info they need to send me the manual and tool. Hopefully, the material they send me will answer my question. I've installed some vg's on a Kitfox but I had to calculate the distance from the leasing edge by using a measurement that was a percentage of the wing cord.
I appreciate the help.
I appreciate the help.
Maule M4 220C
- Mog
- 100+ Posts
- Posts: 979
- Joined: Fri Nov 26, 2010 8:01 pm
- Location: Dallas, TX
- Contact:
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
I would think that removing the paint before gluing a vortex generator fin would be important to longevity, but I know that isn't easy. Mine were glued before the wings were painted and they've held very well over the last 9 years. If they're glued on top of a layer of paint, then the adhesion strength of the paint could be an issue, especially if it's old. What do others who have added them think?
Andy
1986 MX7-180
1986 MX7-180
- crbnunit
- 100+ Posts
- Posts: 1890
- Joined: Tue Mar 18, 2008 12:42 pm
- Location: Alaska
- Contact:
I have found a lot of VG's over the years, usually with a failed layer of paint still attached. They make great spares so thanks to everyone who loses them! Mine were installed on a bare wing and I have only lost one from the underside of the tail. The rock took some fabric with it and the new VG is attached to the patch...
You have to make up your mind about growing up and becoming a pilot. You can't do both!
- Njacko
- 100+ Posts
- Posts: 215
- Joined: Wed Feb 19, 2014 10:26 am
- Location: SW Scotland, UK
- Contact:
Who is online
Users browsing this forum: No registered users and 26 guests