Hello all, I am looking for a set of bolt-on fuselage fittings for Baumann 2720 floats. Am I out of luck and need to cut and weld on fittings?

I have a set of bolt on fuselage float fitting for Baumann 2720s. Before I let go of them, I need the Baumann 2720 part that attaches the rear float strut to the weld in Maule float fitting.

I am rebuilding my M7-235B and added the weld in rear float fittings. Part of the Maule weld in float fitting system is a bolted on bracket outside of the fuselage fabric, a Maule part. I need the Baumann part that attaches the float strut to the Maule bracket. Once I have those, (1ea. L&R) I won’t need the Baumann bolt on float fittings. Any chance you found Baumann fittings for the Maule weld in system? I’ll buy or trade for them.
Thanks!

Sent you a private message

I have bolt on fittings for the Fleet floats. Don't know if they are the same. I also have a water rudder or whatever it is called... (fin that bolts on the bottom of the fuselage under the tail) if anyone is interested.

I am unfamiliar with Fleet floats... can you educate me?

Canadian firm. Now defunct. Fiberglass. I'll try and post some photos if I can dig them out. I can't imagine the mounts aren't somewhat universal... but I know little about floats!