Page 1 of 1
Rear Baggage Panel Dimensions
Posted: Wed Sep 16, 2020 6:24 pm
by wtxdragger
Does anybody have the dimensions for the Rear Baggage Panel in an M7?
I found some guys that will make me a replacement panel with the Molle cutouts. I want to get my loose gear out of the floor, and thought the Molle Panel might be a good idea.
I have the 1242X drawing from the M7 manual, but it doesn't have the measurements.I can also get the measurements from my panel, but it wouldn't have the correct profile.
Re: Rear Baggage Panel Dimensions
Posted: Thu Sep 17, 2020 4:56 am
by Maule over MI
I emailed and called tech support at Maule for dimensions on panel I needed to replace.
They sent me the completed drawing right away.
Re: Rear Baggage Panel Dimensions
Posted: Thu Sep 17, 2020 2:06 pm
by wtxdragger
Thanks, I'll give them a call.
Re: Rear Baggage Panel Dimensions
Posted: Thu Oct 22, 2020 8:42 pm
by AndrewK
Any updates on your molle panel idea? I also have some stuff sitting on the rear floorboard I wouldn't mind securing a little better if this is working out for you.
Andrew
Re: Rear Baggage Panel Dimensions
Posted: Fri Oct 23, 2020 5:35 am
by andy
The Molle panel idea won't work for me because there are too many loose items and not enough space on the panel. Instead I use a
Rubbermaid Brute 14 gallon plastic storage bin that fits nicely in the baggage compartment and is big enough to hold everything except my Bogie bar and sun shield. I keep them between the storage bin and the rear seat so they won't fly around in turbulence or a bumpy landing.
Re: Rear Baggage Panel Dimensions
Posted: Fri Oct 23, 2020 5:09 pm
by UP-M5
i love the idea of a MOLLE board on the rear bulkhead. please keep us posted with picks and a pirep when you get it completed.
Re: Rear Baggage Panel Dimensions
Posted: Fri Oct 23, 2020 7:17 pm
by wtxdragger
I sent my rear baggage panel to them to have it copied.
I wanted to get the tie downs located in the correct spots.
I'll update as soon as I get It back.