I am installing a McCauley C201 on my M4-220C. I am in need of a spinner that will work for this installation. My previously installed spiner will not work.
A D-4101 is the spinner used on the C22 prop, I am not sure if it will fit a c201 but I would like to get my hands on one.
C201 Mod
-
- Posts: 2
- Joined: Sun Jul 05, 2015 9:26 am
- Location: Inver Grove Heights, MN
- Contact:
- FARMAULE
- 100+ Posts
- Posts: 194
- Joined: Wed Oct 24, 2012 1:31 pm
- Location: West Virginia
- Contact:
The spinner that fits the 22 also fits the 201. I did this swap a few years ago and it was pretty straight forward. Depending on what the 201 came off of you will have to have a prop shop make some adjustments internally to the stops to make correct rpm. If you need the numbers I can dig them up for you. Let me know.
-
- Posts: 2
- Joined: Sun Jul 05, 2015 9:26 am
- Location: Inver Grove Heights, MN
- Contact:
Who is online
Users browsing this forum: No registered users and 60 guests