Prop for M-6-235
- Andy Young
- 100+ Posts
- Posts: 1547
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
Prop for M-6-235
With all the talk of props for different model, engine, and landing gear combinations, I've sort of lost track: which is the preferred McCauley prop model and length for an M-6-235 with stock length gear? I run 31" Bushwheels all summer, but 8.50s all winter, and don't want to have to swap props when I swap tires.
Anybody have a good used prop of the appropriate model that they want to sell?
Thanks
Anybody have a good used prop of the appropriate model that they want to sell?
Thanks
- DirtDobber
- Posts: 59
- Joined: Fri Nov 09, 2012 9:54 am
- Location: Sterling City TX
- Contact:
If you want a 3 blade Mac, I know where one is that was removed from an M7 recently. Good shape.
Otherwise an 86" two blade will be the best performer.
Otherwise an 86" two blade will be the best performer.
Last edited by DirtDobber on Fri Mar 24, 2017 7:52 pm, edited 1 time in total.
- chazdevil
- 100+ Posts
- Posts: 222
- Joined: Fri Sep 18, 2009 10:31 am
- Location: gone flying
- Contact:
- Andy Young
- 100+ Posts
- Posts: 1547
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
- Andy Young
- 100+ Posts
- Posts: 1547
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
- gbarrier
- 100+ Posts
- Posts: 1560
- Joined: Thu Jul 14, 2011 5:41 pm
- Location: 9NR4 North Carolina
- Contact:
It's amazing how much difference props make. I have a three blade scimiitar Hartzell on my M6-235. I also fly a M7-260 with a three blade Mac. I find myself pulling about 20" in the pattern with the Mac to do the same thing that I do on the Hartzell at 15" . I think I would like to have a nice MT 3 blade to put the old girl on a diet and move the cg a little aft but after seeing the difference between those two props no way without flying one first.
Apologies to Andy for hijacking your thread. Sometimes just like to babble.
Apologies to Andy for hijacking your thread. Sometimes just like to babble.
- Andy Young
- 100+ Posts
- Posts: 1547
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
Ok, I got a little less lazy and looked through the archive. Looks like I shoild be looking at the 81" 90RA-9, or, if I add extended gear (which I am considering) the 86" 90RA-4. Looks like these both might be on the type certificate?
Anyone know of a used one of either of these for sale?
It does seem like the two blade is a better fit for my mission than the three blade. Like to avoid adding weight to the nose.
Anyone know of a used one of either of these for sale?
It does seem like the two blade is a better fit for my mission than the three blade. Like to avoid adding weight to the nose.
- DirtDobber
- Posts: 59
- Joined: Fri Nov 09, 2012 9:54 am
- Location: Sterling City TX
- Contact:
- Andy Young
- 100+ Posts
- Posts: 1547
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
All true, though I'm not fond of the price of the MT, nor the servicing logistics.DirtDobber wrote:If you really want to get weight off the nose, have the ground clearance, and get max performance all around....83" 2 blade MT. 15-20 lbs lighter and will rip better than the 86" Mac (or any of the others mentioned).
-
- 100+ Posts
- Posts: 515
- Joined: Tue Dec 05, 2006 5:48 pm
- Contact:
Last edited by MauleWacko on Fri Mar 31, 2017 7:37 am, edited 1 time in total.
- Andy Young
- 100+ Posts
- Posts: 1547
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
Thanks; that's exactly the info I was looking for. Now to find one. I might have to pony up and buy new, but I'm sure the price will be shocking.MauleWacko wrote:The full model # for the McCauley is a B2D37C224/90RA the -4 number equals blade length from 90 inches which is 86 inches or a -8 for 82 inches. It is on the T.C.. I needed one years back and had a hell of a time finding one or even blades. This is one of the things I mention about (one off model numbers on this type aircraft). The C224 was not used on anything else and it is very hard to find a straight one. Don't pass one up, they are not laying all over the place used.
- freedom
- 100+ Posts
- Posts: 239
- Joined: Fri Jul 17, 2015 6:34 am
- Contact:
- gbarrier
- 100+ Posts
- Posts: 1560
- Joined: Thu Jul 14, 2011 5:41 pm
- Location: 9NR4 North Carolina
- Contact:
Freedom, it is a model HC-C3YR-1RF. I really like the prop and feel like it pulls well. It's just heavy. Don't have a copy of wt. and bal. here at the house but I want to say that it is something like 22# heavier than the original two blade one. Prop has less than 300 hours on it and represents quite an investment so guess I'll keep it.
- maules.com
- 100+ Posts
- Posts: 3144
- Joined: Tue Aug 29, 2006 4:01 pm
- Contact:
The 86" McCauley two blade needs larger than 8.50x6 tyres, and also is only certified on the O540 J, or IO540 W, engines which run at 2400 rpm max.
The 80" three blade Mac is heavier than the 81" and 86" two blade Macs and lighter and longer than the three blade Hartzell.
Using same day, same airplane, same pilot during STC testing qualification flights, the 80" three blade was much quicker than the 81" and and a tad quicker than 86" two blades in initial acceleration to aprox vx. then the 80" three blade, and 86" two bladed climbed at very similar fpm and better than the 81" two blade.
The 86"two blades are a tad faster in cruise.
The 80" three blade is significantly quieter and smoother than either of the two bladed. The three bladed costs a bit over a thou more. The Mac's have no service time requirements.
The 80" three blade Mac is heavier than the 81" and 86" two blade Macs and lighter and longer than the three blade Hartzell.
Using same day, same airplane, same pilot during STC testing qualification flights, the 80" three blade was much quicker than the 81" and and a tad quicker than 86" two blades in initial acceleration to aprox vx. then the 80" three blade, and 86" two bladed climbed at very similar fpm and better than the 81" two blade.
The 86"two blades are a tad faster in cruise.
The 80" three blade is significantly quieter and smoother than either of the two bladed. The three bladed costs a bit over a thou more. The Mac's have no service time requirements.
- Andy Young
- 100+ Posts
- Posts: 1547
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
Who is online
Users browsing this forum: No registered users and 54 guests