reduced scale pilot
- Sam Rutherford
- 100+ Posts
- Posts: 197
- Joined: Sat Nov 10, 2007 11:10 pm
- Location: Europe
- Contact:
reduced scale pilot
Hi,
I will jump into a Maule MX7 180 in about 10 days time for my 'in the deep end' initiation (purchase!).
I am 5'6", so hardly a basketball player. Is this going to make my life complicated?
Are the Oregon aero cushions a good move?
Other similar options?
Is there any height adjustment on the Maule seats?
Thanks, Sam.
I will jump into a Maule MX7 180 in about 10 days time for my 'in the deep end' initiation (purchase!).
I am 5'6", so hardly a basketball player. Is this going to make my life complicated?
Are the Oregon aero cushions a good move?
Other similar options?
Is there any height adjustment on the Maule seats?
Thanks, Sam.
- maules.com
- 100+ Posts
- Posts: 3144
- Joined: Tue Aug 29, 2006 4:01 pm
- Contact:
It all depends on the year of the plane.
There are three seat frames though the one designed for police patrol many years ago is not often seen.
The latest seat allows the most rearward/downward adjustment.
The rest of adjustment is done via a number of different cushion foams.
In the later seats, at 69" I like to add a cushion, especially to those with Oregon Aero cushions as I like to be higher up. Of course now you get no advantage from the 'conforfoam system'.
You may find that a cushion on the backrest will do the job.
There are three seat frames though the one designed for police patrol many years ago is not often seen.
The latest seat allows the most rearward/downward adjustment.
The rest of adjustment is done via a number of different cushion foams.
In the later seats, at 69" I like to add a cushion, especially to those with Oregon Aero cushions as I like to be higher up. Of course now you get no advantage from the 'conforfoam system'.
You may find that a cushion on the backrest will do the job.
-
- 100+ Posts
- Posts: 1773
- Joined: Tue Aug 29, 2006 6:53 am
- Location: ALbany Ga., KABY
- Contact:
- Sam Rutherford
- 100+ Posts
- Posts: 197
- Joined: Sat Nov 10, 2007 11:10 pm
- Location: Europe
- Contact:
downward?!
Downward movement is definitely not the aim.
The aircraft is a 1995 MX7 180 - does that have an upwards adjustable seat.
Otherwise it sounds as if the Oregon Aero 2" lift (a little like I have on my Land Rover!) is a good plan.
Sam.
The aircraft is a 1995 MX7 180 - does that have an upwards adjustable seat.
Otherwise it sounds as if the Oregon Aero 2" lift (a little like I have on my Land Rover!) is a good plan.
Sam.
- 210TC
- 100+ Posts
- Posts: 733
- Joined: Fri Jan 12, 2007 7:58 pm
- Location: New Braunfels, Tx
- Contact:
some useful info http://www.earaircraft.com/img/uploads/lit/news_3.pdf
I had to build some special contoured seats for my rocket. We purchased the CONFORM foam by Aearo Company, it meets all the faa reg's. This was a very odd ball "seat" up. However, after glueing and making many adjustment (fitting me in the airplane) I was in heaven.
Then I had a shop make up a cover over the final bun holders.
I had to build some special contoured seats for my rocket. We purchased the CONFORM foam by Aearo Company, it meets all the faa reg's. This was a very odd ball "seat" up. However, after glueing and making many adjustment (fitting me in the airplane) I was in heaven.
Then I had a shop make up a cover over the final bun holders.
David
www.Landshort.com
www.Landshort.com
-
- 100+ Posts
- Posts: 1773
- Joined: Tue Aug 29, 2006 6:53 am
- Location: ALbany Ga., KABY
- Contact:
All the seats that I have seen slide on an inclined plane. Forward and up, back and down. It's one adjustment.
The Oregon Aero cushions are expensive, but you get what you pay for. I put the inserts in when I replaced the interior and now they are the most comfortable aircraft seats I've ever sat in. The factory seat cushions were about the worst, but to be fair they were over 20 years old and I'm sure worn out.
I don't have experience with the portable ones, but I don't think you will go wrong with them. I would suggest the lumbar support as well, there was no support there in my factory seats.
On edit: I believe Oregon Aero seat inserts are a factory option, it's possible the aircraft may have them. They won't help raise you, may even hurt, but the lumbar support would be there in which case you might not want the portable cushion with lumbar support.
The Oregon Aero cushions are expensive, but you get what you pay for. I put the inserts in when I replaced the interior and now they are the most comfortable aircraft seats I've ever sat in. The factory seat cushions were about the worst, but to be fair they were over 20 years old and I'm sure worn out.
I don't have experience with the portable ones, but I don't think you will go wrong with them. I would suggest the lumbar support as well, there was no support there in my factory seats.
On edit: I believe Oregon Aero seat inserts are a factory option, it's possible the aircraft may have them. They won't help raise you, may even hurt, but the lumbar support would be there in which case you might not want the portable cushion with lumbar support.
- 210TC
- 100+ Posts
- Posts: 733
- Joined: Fri Jan 12, 2007 7:58 pm
- Location: New Braunfels, Tx
- Contact:
Extra info
In the 70's at Ames Research Center at Moffet Field in California NASA first developed this wonderful product "Temper Foam".
I think Oregon Aero ueses this product which can be found by googling the name. The product I referenced is a copy cat.
A64, yes the cover needs to be of a material that will not slip or some kind of attachment needs to be made. VELCRO straps work great. On the other hand any smooth surface cover is like slip and slide. My daughters did this on the way to Alaska, I'm glad see was 12.
BTW: I hope I understood you correctly (seat cushions)
In the 70's at Ames Research Center at Moffet Field in California NASA first developed this wonderful product "Temper Foam".
I think Oregon Aero ueses this product which can be found by googling the name. The product I referenced is a copy cat.
A64, yes the cover needs to be of a material that will not slip or some kind of attachment needs to be made. VELCRO straps work great. On the other hand any smooth surface cover is like slip and slide. My daughters did this on the way to Alaska, I'm glad see was 12.
BTW: I hope I understood you correctly (seat cushions)
David
www.Landshort.com
www.Landshort.com
- YELLOWMAULE
- 100+ Posts
- Posts: 790
- Joined: Tue Aug 29, 2006 11:49 am
- Location: AK
- Contact:
I have an old M-4 with the stock seat cushions that are coming up on 40YO and while still in good condition, could use some improvement. I'm 5' 7" (On a good day) and find that the height and travel is fine for me and my spouse. We have a little over 600 hours with the majority of that time being XC. We are good for 4-5 hours max before a mandatory stop. Three hour legs are more the norm for us. Even wearing arctic gear like today's flight (-12 at noon today) being bulky and restrictive, is comfortable. I also have the plates that install below the seat to trap the heat in the forward part of the cockpit. Big difference there.
Maybe my kids are right and I am (Have) a hard ass, but we've faired quite well to date in terms of posterior comfort. Now with the advent of the "New" M-4, we have the option of replacing the seat cushions with the Oregon Areo cushions from the factory which will be the path I take.
I guess my point is that the room in the cockpit is sufficient for us but there is always room for improvement. I have had a couple of bigger passengers, the largest was about 6' 2" and high three hundreds. It was one of the more challeging flights me being pushed against the door. With effort, they fit but not by much. One of my fishing partners is 6' 3" (but slim) and I think I will add some way to extend the aft travel of the seat to accomodate him when the interior gets attention.
Enjoy your trip and post some pictures!
Maybe my kids are right and I am (Have) a hard ass, but we've faired quite well to date in terms of posterior comfort. Now with the advent of the "New" M-4, we have the option of replacing the seat cushions with the Oregon Areo cushions from the factory which will be the path I take.
I guess my point is that the room in the cockpit is sufficient for us but there is always room for improvement. I have had a couple of bigger passengers, the largest was about 6' 2" and high three hundreds. It was one of the more challeging flights me being pushed against the door. With effort, they fit but not by much. One of my fishing partners is 6' 3" (but slim) and I think I will add some way to extend the aft travel of the seat to accomodate him when the interior gets attention.
Enjoy your trip and post some pictures!
-
- 100+ Posts
- Posts: 1773
- Joined: Tue Aug 29, 2006 6:53 am
- Location: ALbany Ga., KABY
- Contact:
Yellow Maule,
I put the "new" seats and tracks in when my interior was done. I think the new seats have a longer base and pretty sure the tracks do allow the seats to slide farther back like Jeremy said. Be aware with the new seats and Oregon Aero cushions it will cost you around a grand a seat more than just having your existing ones recovered. This summer we went on a trip that in a couple of weeks we flew 65 hours, the seats are worth it because we weren't sore even though we spent 10 hours in the airplane a couple of days.
I put the "new" seats and tracks in when my interior was done. I think the new seats have a longer base and pretty sure the tracks do allow the seats to slide farther back like Jeremy said. Be aware with the new seats and Oregon Aero cushions it will cost you around a grand a seat more than just having your existing ones recovered. This summer we went on a trip that in a couple of weeks we flew 65 hours, the seats are worth it because we weren't sore even though we spent 10 hours in the airplane a couple of days.
- maules.com
- 100+ Posts
- Posts: 3144
- Joined: Tue Aug 29, 2006 4:01 pm
- Contact:
Most confor foam seat cushions are made up of two or three different density layers, and carved with a sharp knife tosuit you. It is easy to remove the Maule seat cover, buy the foam and carve your own for size, fit and desity. Go to www.seatfoam.com and you will save a bunch of dollars and have perfection. If you buy from Maule it will cost more as they have to buy from Oregon Aero and it is supplied in two thicknesses, but you won't know which to order.
-
- 100+ Posts
- Posts: 1773
- Joined: Tue Aug 29, 2006 6:53 am
- Location: ALbany Ga., KABY
- Contact:
- Green Hornet
- 100+ Posts
- Posts: 606
- Joined: Sat Aug 26, 2006 8:53 pm
- Location: No Name City, No Where Land, USA
- Contact:
I use a combination of the large sportys seat
www.sportys.com/pilotshop
and the Oregon- Aero Portable Universal SoftSeat® Cushions
Like Jeremy I like being higher in the seat for visibility over the nose.
I am 5'10" and experimented with different levels of back and seat increase and comfort. I was unaware of the foam supplier Jeremy recommended until today and will put it on my wish list.
www.sportys.com/pilotshop
and the Oregon- Aero Portable Universal SoftSeat® Cushions
Like Jeremy I like being higher in the seat for visibility over the nose.
I am 5'10" and experimented with different levels of back and seat increase and comfort. I was unaware of the foam supplier Jeremy recommended until today and will put it on my wish list.
- David T
- Posts: 3
- Joined: Sat Nov 24, 2007 6:10 pm
- Contact:
Rear Seat
I have a 2000 MT 7 260. When I bought it, the 5th seat was not to be found. I tried getting a new one from Maule and am told they can't match the light gray velour and leather that the 5th seat back and side panel is covered in. Does anyone know where I can find a 5th seat bottom that would match or that I can get recovered?
Thanks
David
Thanks
David
-
- 100+ Posts
- Posts: 1773
- Joined: Tue Aug 29, 2006 6:53 am
- Location: ALbany Ga., KABY
- Contact:
FWIW, I sent in for a qoute for seat cushions for the little C-140 I have from the website Jeremy posted. I estimate, because I do not have a qoute from Oregon Aero, that Jeremy's site is cheaper by about a factor of 7 or 8. Like around $100 a seat as opposed to $800 a seat I think I will go that route for the 140
- 210TC
- 100+ Posts
- Posts: 733
- Joined: Fri Jan 12, 2007 7:58 pm
- Location: New Braunfels, Tx
- Contact:
Once you make your own, you will never buy another premade seat.
It fits soooo well.
It fits soooo well.
David
www.Landshort.com
www.Landshort.com
Who is online
Users browsing this forum: No registered users and 13 guests