Page 1 of 1
Garmin Panel
Posted: Tue Jul 20, 2021 6:51 pm
by Demopilot
Re: Garmin Panel
Posted: Wed Jul 21, 2021 2:03 pm
by Hale-Yes
Wow, very nice indeed. I would go the same way if money was no object, but it is. . . .
Re: Garmin Panel
Posted: Wed Aug 11, 2021 8:59 pm
by Demopilot
Helps onthe dollars if you are an A&P and are willing to do all the work yourself.
Re: Garmin Panel
Posted: Fri Aug 13, 2021 12:56 pm
by Njacko
Nice. I’m thinking of doing the same if and when my MX-7 rebuild gets to that stage…
Did you have to install new fuel gauge senders, or does the GTX EIS use the factory senders?
Re: Garmin Panel
Posted: Mon Aug 23, 2021 2:45 pm
by Demopilot
Factory resistance probes installed in my plane were compatible. There is a Garmin service bulletin to enhance accuracy.
garmin recommends replacement, but they are pricey when the existing probes were fully functional
Re: Garmin Panel
Posted: Thu May 19, 2022 5:58 pm
by oldgoat
Have a M-7 just made the deposit for upgrade adding Garmin 275, Garmin 3x 10" and Garmin 3x 7" Garmin 355 but keeping Garmin 430 wass
removing all steam gauges
looking for advice with layout also will be looking for another job to pay for all this
Re: Garmin Panel
Posted: Mon May 23, 2022 5:49 am
by wtxdragger
That is a clean panel, nicely done.
Re: Garmin Panel
Posted: Tue May 24, 2022 4:44 pm
by oldgoat
DemoPilot
Really like your panel
I'm scheduled another two weeks out before they start mine
Is that a 10" Garmin 3X
also I like where you put the tip tank switches