Garmin Panel

Post photos of your airplane here. You can also post photos that do not belong in another forum section.
Post Reply
Demopilot
Posts: 9
Joined: Sun Dec 29, 2019 6:51 pm
Location: Indianapolis, IN
Contact:

Garmin Panel

Post by Demopilot »

Image

Hale-Yes
100+ Posts
Posts: 212
Joined: Sun Sep 06, 2015 7:32 pm
Location: Brawley, Ca. USA
Contact:

Re: Garmin Panel

Post by Hale-Yes »

Wow, very nice indeed. I would go the same way if money was no object, but it is. . . . :(
"The problems we face today exist because the people who work for a living are out numbered by those who vote for a living" Author unknown.

Demopilot
Posts: 9
Joined: Sun Dec 29, 2019 6:51 pm
Location: Indianapolis, IN
Contact:

Re: Garmin Panel

Post by Demopilot »

Helps onthe dollars if you are an A&P and are willing to do all the work yourself.

User avatar
Njacko
100+ Posts
Posts: 215
Joined: Wed Feb 19, 2014 10:26 am
Location: SW Scotland, UK
Contact:

Re: Garmin Panel

Post by Njacko »

Nice. I’m thinking of doing the same if and when my MX-7 rebuild gets to that stage…

Did you have to install new fuel gauge senders, or does the GTX EIS use the factory senders?
MX-7-180 N280SA

Demopilot
Posts: 9
Joined: Sun Dec 29, 2019 6:51 pm
Location: Indianapolis, IN
Contact:

Re: Garmin Panel

Post by Demopilot »

Factory resistance probes installed in my plane were compatible. There is a Garmin service bulletin to enhance accuracy.
garmin recommends replacement, but they are pricey when the existing probes were fully functional

oldgoat
Posts: 9
Joined: Mon Nov 17, 2014 5:40 pm
Location: North Georgia
Contact:

Re: Garmin Panel

Post by oldgoat »

Have a M-7 just made the deposit for upgrade adding Garmin 275, Garmin 3x 10" and Garmin 3x 7" Garmin 355 but keeping Garmin 430 wass
removing all steam gauges
looking for advice with layout also will be looking for another job to pay for all this

User avatar
wtxdragger
100+ Posts
Posts: 243
Joined: Sat Nov 09, 2013 3:46 pm
Location: Iraan,Texas
Contact:

Re: Garmin Panel

Post by wtxdragger »

That is a clean panel, nicely done.
Mercifully Free from the Ravages of Intelligence
1989 M7-235 N90KD
1975 T210L N1675X
2022 CCK-1865 N922UM

https://www.instagram.com/wtxdragger/

oldgoat
Posts: 9
Joined: Mon Nov 17, 2014 5:40 pm
Location: North Georgia
Contact:

Re: Garmin Panel

Post by oldgoat »

DemoPilot
Really like your panel
I'm scheduled another two weeks out before they start mine

Is that a 10" Garmin 3X

also I like where you put the tip tank switches

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests