Floats

Discuss or announce upcoming gatherings.
Post Reply
mmiller54
Posts: 18
Joined: Sat Apr 12, 2014 3:11 pm
Location: KTVC
Contact:

Floats

Post by mmiller54 »

Considering putting my 2006 MT 7-260 on amphibs. Any thoughts, recommendations, comments? Thanks.

cberonio
Posts: 22
Joined: Fri May 07, 2021 11:10 am
Location: Central Coast CA
Contact:

Re: Floats

Post by cberonio »

IF you can find them EDO 2790 are a good float (although they add some weight you get a 2750 max gross up from 2500) and have good parts availability and documentation. Otherwise (again if you can find them or wait) Wipline 3000 are really nice and a bit more expensive. You will need to learn how to land a shopping cart (4 wheels) and you no longer can use 48 degrees of flaps. Don't forget the other odds and ends you need on the plane.

User avatar
andy
Site Admin
Posts: 1704
Joined: Mon Aug 06, 2007 2:05 pm
Location: Lake James, NC, USA
Contact:

Re: Floats

Post by andy »

Do you already have the rear float fittings on your tubing? There are also some reinforcement tubes that attach to the tubing behind the panel. Lift rings on the wing tops make it easier to service the floats too. You'll need a ventral fin to counter yaw. Useful load will decrease due to the weight of the floats. You will probably make it a 3 person rather than 4 person airplane. I'm partial to the Wipline 3000 floats but they are more expensive.
Andy
1986 MX7-180
Image

cberonio
Posts: 22
Joined: Fri May 07, 2021 11:10 am
Location: Central Coast CA
Contact:

Re: Floats

Post by cberonio »

Also, I have all of the documentation for the 2790's if anyone needs them, just PM me.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests