Location of caliper with 31 inch tires
- Gary Raser
- Posts: 86
- Joined: Sat Aug 29, 2015 5:50 pm
- Location: Plowvill Pa
- Contact:
- Gary Raser
- Posts: 86
- Joined: Sat Aug 29, 2015 5:50 pm
- Location: Plowvill Pa
- Contact:
Re: Location of caliper with 31 inch tires
Hi All my first attempt at adding a photo,
I have installed M-9 axels double puck brakes and 31" tires, In the picture you can see the location of the caliper, it was the only place there was enough clearance with the spring gear. even with the m-9 axel and 12 psi in the tires there is still a little contact between tire and caliper. The tires and brakes are working well. My question- is this location of the double puck caliper standard on spring gear? The plane is a 2008 M-7 235C
Thanks for your thoughts
Gary
I have installed M-9 axels double puck brakes and 31" tires, In the picture you can see the location of the caliper, it was the only place there was enough clearance with the spring gear. even with the m-9 axel and 12 psi in the tires there is still a little contact between tire and caliper. The tires and brakes are working well. My question- is this location of the double puck caliper standard on spring gear? The plane is a 2008 M-7 235C
Thanks for your thoughts
Gary
-
- 100+ Posts
- Posts: 298
- Joined: Sat Dec 22, 2018 1:09 pm
- Location: KY+AK
- Contact:
Re: Location of caliper with 31 inch tires
No experience with spring gear maules, but are you sure the brake rotors you have are correct? There are two different models of brake rotors with the difference being the thickness of the rotor surface and more importantly for you, the offset from wheel to rotor. Only the high offset model will work with bushwheels. Airframes Alaska only sells the correct one these days. Originally by Cleveland, one was made for 6.00 tires and one was made for 8.50.
As an aside, I would not want my calipers hanging down as the lowest thing. Also, if the calipers don’t fit at the front or back, that likely means that they only fit at your bottom placement because of tire flex. But soft tires flex all over the place so I would not run them like that.
-Asa
As an aside, I would not want my calipers hanging down as the lowest thing. Also, if the calipers don’t fit at the front or back, that likely means that they only fit at your bottom placement because of tire flex. But soft tires flex all over the place so I would not run them like that.
-Asa
- Undaunted
- 100+ Posts
- Posts: 129
- Joined: Wed Feb 12, 2014 1:14 pm
- Location: Wisconsin
- Contact:
Re: Location of caliper with 31 inch tires
Been there done that and had the same problem. You will need the brake disc spacer kit from Airframes Alaska. This will move the wheel out so it does not rub on the brake. Im not sure of the part number but if you call them they will set you up. Once I installed this the rub issue is not longer an issue even with 10 lbs. I will see if I can get the part number and or a photo.
1999 M7-235C
- Undaunted
- 100+ Posts
- Posts: 129
- Joined: Wed Feb 12, 2014 1:14 pm
- Location: Wisconsin
- Contact:
Re: Location of caliper with 31 inch tires
This is what it is, I got mine from AA. I needed 2 per wheel to bring it out a full 1/4 inch and will need longer bolts for this. AA has a kit with this and the bolts. The description in the link below is exactly how you install these. Also with regards to the double puck brakes I believe I had to slightly round the end of the spring arm to accommodate the caliper housing. Hope that helps.
https://fadodge.com/brake-disc-spacer-f ... rake-kits/
https://fadodge.com/brake-disc-spacer-f ... rake-kits/
1999 M7-235C
- maules.com
- 100+ Posts
- Posts: 3144
- Joined: Tue Aug 29, 2006 4:01 pm
- Contact:
Re: Location of caliper with 31 inch tires
The caliper is best mounted in forward location.
This produces better braking as rotational forces pull the tyre 'to' the ground rather than 'away' from the ground.
On a side loaded tyre, (crosswind landing etc) the tyre(of any size) is deflected inwards and it contacts the caliper.
With lower pressures if the tyre is rotating upwards toward the caliper it can grip, tear, or stop the rotation.
If caliper is on front the tyre will not be deflected onto it and will pass on by.
The axle mounting holes are biased to the rear of the original wide spring gear so the caliper cannot fit unless the front bottom corner of the gear is relieved with file etc. Maule does have a drawing for this if one wants or needs one.
This produces better braking as rotational forces pull the tyre 'to' the ground rather than 'away' from the ground.
On a side loaded tyre, (crosswind landing etc) the tyre(of any size) is deflected inwards and it contacts the caliper.
With lower pressures if the tyre is rotating upwards toward the caliper it can grip, tear, or stop the rotation.
If caliper is on front the tyre will not be deflected onto it and will pass on by.
The axle mounting holes are biased to the rear of the original wide spring gear so the caliper cannot fit unless the front bottom corner of the gear is relieved with file etc. Maule does have a drawing for this if one wants or needs one.
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
Re: Location of caliper with 31 inch tires
Another good reason to mount the caliper on the front is to protect the disk pads from water, dirt and debris.
Andy
1986 MX7-180
1986 MX7-180
- Gary Raser
- Posts: 86
- Joined: Sat Aug 29, 2015 5:50 pm
- Location: Plowvill Pa
- Contact:
Re: Location of caliper with 31 inch tires
Thanks everyone
Who is online
Users browsing this forum: No registered users and 5 guests