Vertical Compass
-
- Posts: 54
- Joined: Fri Mar 19, 2021 8:52 am
- Contact:
Re: Vertical Compass
Well, I got my trusty bulk tape demagnetizer out and degaussed all the steel poles around the glare shield, it's a bit of a learning process to do it right. I also used my cell phone with a magnetic field sensor app to find and checked the sources of the problem..... Anyway, I believe I've removed most of the magnetism. The compass only moves about 10 degrees while placing it back in the center of the glare shield. I haven't tried to adjust the compensators yet.. Hoping this has solved the problem.
-
- 100+ Posts
- Posts: 735
- Joined: Tue Oct 17, 2006 3:07 pm
- Location: KGCY
- Contact:
Re: Vertical Compass
Bulk tape demagnetizer? Magnetic field app? I had never heard of either. That’s pretty awesome.
Kirk
Kirk
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
Re: Vertical Compass
Here's one on Amazon: https://www.amazon.com/TC-1-Degaussing- ... 8-194&th=1
They work by using alternating current (AC) to switch the polarity of the magnetic field at 60 Hz, which randomizes the direction of the electrons in the ferrous material. There's a technique to using them. You start close to the material and gradually move the demagnetizer away. Otherwise, you'll just switch the direction of the electrons without demagnetizing the object.
You can use a small compass to determine if there is any residual magnetic field.
They work by using alternating current (AC) to switch the polarity of the magnetic field at 60 Hz, which randomizes the direction of the electrons in the ferrous material. There's a technique to using them. You start close to the material and gradually move the demagnetizer away. Otherwise, you'll just switch the direction of the electrons without demagnetizing the object.
You can use a small compass to determine if there is any residual magnetic field.
Andy
1986 MX7-180
1986 MX7-180
-
- Posts: 54
- Joined: Fri Mar 19, 2021 8:52 am
- Contact:
Re: Vertical Compass
It's an old Radio Shack bulk tape eraser.. I've had this thing for at least 40 years. Seems to do the job....
- Attachments
-
- Tape Eraser.jpg (125.49 KiB) Viewed 5785 times
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
Re: Vertical Compass
I have one of those old Radio Shack ones too but it has a warning not to use it with metal tape. I don't know why that would be. It's a pretty simple device with just a transformer inside. The only thing I can think of is that if it encounters a large ferrous object, it might draw more current than the internal transformer wire is designed for and burn out.
Andy
1986 MX7-180
1986 MX7-180
Who is online
Users browsing this forum: Zoller and 19 guests