Tail surface fabric the Maule way!
Posted: Sun Aug 22, 2021 7:55 am
Has anyone themselves physically fabric their tail surfaces using the Maule spec where they overlapped each panel?
I am interested on how you lapped the fabric around the ribs. Did you go around all 3 sides of the rib or did you just go over the top and side?
Did you overlap the panel 2 inches , starting from inside of the rib?
How wide was your tapes, so as to give you good distance over the fabric seam and rib edge?
Thanks
John
I am interested on how you lapped the fabric around the ribs. Did you go around all 3 sides of the rib or did you just go over the top and side?
Did you overlap the panel 2 inches , starting from inside of the rib?
How wide was your tapes, so as to give you good distance over the fabric seam and rib edge?
Thanks
John