Firewall Forward Project
-
- 100+ Posts
- Posts: 212
- Joined: Sun Sep 06, 2015 7:32 pm
- Location: Brawley, Ca. USA
- Contact:
Re: Firewall Forward Project
Here is where I got my oil return hoses http://www.aircraftspecialties.aero/hose/. As for the sludge removel others may have a better Idea, but I would pressure wash it out with an air powered solvent gun, drain your oil and discard the filter, aftering getting everything buttened up, fire it up with clean high detergent oil and a new filter, bring it up to running temp (hot) and then shut it off and immediately drain it again and discard the filter after cutting it open for inspection.
"The problems we face today exist because the people who work for a living are out numbered by those who vote for a living" Author unknown.
- krautman67
- Posts: 87
- Joined: Wed Feb 11, 2009 9:17 am
- Location: Fergus, Ontario
- Contact:
Re: Firewall Forward Project
Thanks Hale-Yes, that’s what I was thinking also.
[url=https://postimg.cc/phRrMF3c][img]https://i.postimg.cc/phRrMF3c/EB23-E33- ... 657150.jpg[/img][/url]
[url=https://postimg.cc/phRrMF3c][img]https://i.postimg.cc/phRrMF3c/EB23-E33- ... 657150.jpg[/img][/url]
1976 M5-235C
Who is online
Users browsing this forum: No registered users and 10 guests