Page 1 of 1

Static Port Location

Posted: Fri Jan 01, 2021 5:27 pm
by Andy Young
Anybody happen to have a copy of the drawing that shows the dimensions for static port location? I measured mine before taking it apart, but it turns out that my static ports were installed in a non-standard location the last time it was re-covered. I’m contemplating putting them back in the factory-designated location.

Re: Static Port Location

Posted: Sat Jan 02, 2021 2:56 am
by andy
Andy, here's drawing 6060F Rev. F if that helps.
Image

Re: Static Port Location

Posted: Sat Jan 02, 2021 6:26 am
by Andy Young
Thanks Andy,

Unfortunately, that drawing has had the dimensions removed. That seems to be the case with all drawings included in the Parts CD/Thumbdrive provided by Maule.

Re: Static Port Location

Posted: Sat Jan 02, 2021 6:44 am
by johnmo61
I pm'd you.

Re: Static Port Location

Posted: Sat Jan 02, 2021 7:14 am
by Andy Young
Still need dimensions if anyone happens to have them.

Re: Static Port Location

Posted: Sat Jan 02, 2021 4:52 pm
by Allparg
Apparently the notes also... i wassent the thumbdrive around the ATP time, none of the drawings have the note callouts🤬

Re: Static Port Location

Posted: Tue Jan 12, 2021 7:50 pm
by MnMauleFlyer
No drawing, but in the course of tearing mine down for re-cover I took a couple pics just from the passenger side. The other side was symmetric.

Image

Image

Re: Static Port Location

Posted: Tue Jan 12, 2021 8:39 pm
by Andy Young
Thanks. That’s pretty close to where I ended up on the right. On the left, I went much higher, to clear the battery. This is shown as an optional placement on the Maule drawing.

Re: Static Port Location

Posted: Wed Jan 13, 2021 5:38 am
by Duane
Andy, pm me and I'll send you the full installation print. Our IT guy that did those DVD's took out some dimensions that should have been included. Don't blame him, that was a huge task to put those together and some things could be tweaked.

Re: Static Port Location

Posted: Wed Jan 13, 2021 1:47 pm
by Allparg
Yep he left out imortant referance notes on the copy i have :( :(