Question, I am assuming that you need to change the torque arms on the 7 series Maules when you change from single-piston brakes to dual-piston brakes? Does anyone have the part numbers for the torque arms for dual piston set up? I can't find any information on my Maule parts CD for the wheels or brakes, and reading Cleveland's application guide makes my head hurt. Thanks

Try looking at drawing 4035F. Calls out 30-52N brake sets, which in turn call out the 75-13600 torque plate. At least that’s what’s on my M-6; I believe M-7 is the same.

Andy, I wish Maule would sell a complete library of all there drawings. I would sure buy one. Drawing 4035Fis not included on my MT 7 CD. I did find that same torque arm number in the Cleveland reference guide for the 30-52N brake assembly. But I was not sure that was it, because I found a note on Maule drawing 4117E referencing double piston brake assembly 30-52K and that lists torque arm 075-05401. It's enough to make your eyes blurry. Thanks again andy