Replacement of PTT button

[gregorydshanks]

How difficult is it to replace the PTT button on a '93 MXT. It has the later model yoke.

[DeltaRomeo]

Pop it up out of the yoke and you will see; you'll need a soldering iron and a replacement switch.

[andy]

The hardest part can be the length of the two wires going through the yoke. If they're too short, you can't get the PTT switch out far enough to do a good solder job. If you get a chance to replace short wires, do it. Use the Maule PTT switch rather than some off-brand. It's got a larger button that's easier on your thumb and it will last longer than a cheap version.