Turbo Maule's

benflyn · Post by **benflyn** » Tue Aug 28, 2007 8:13 pm

Mauler,

The wastegate cable, Lyc. #LW-14714

This should have the threaded housing ends. I just replaced mine. The old one had the threaded housing.

Pay special attention to the routing of the throttle and waste gate cables, sharp bends and etc that cause stiff throttle movement.

Gaining on the TC hope to have it off the ground this fall.

PS, W.A.T. is that a kit that replaces the wood stringers with steel tubing?

210TC · Post by **210TC** » Wed Aug 29, 2007 2:43 pm

This is what you deal with 2" below the top cowl.
The dip stick will toast your fingers the first time you check theoil hot.

210TC · Post by **210TC** » Wed Aug 29, 2007 6:34 pm

benflyn,
Would you post some picture's of your 210TC???
I know it is going to be a beauty

210TC · Post by **210TC** » Fri Feb 26, 2010 1:17 pm

I have put the word out that Betsey will be sold. i have to be careful to not violate this sites rules. Shortly, I will prepare a video and post it on you tube (hopefully). This will answer everybodies questions. I think Betsey will be struting herself on Ebay soon??? I made an agreement to finish her up (lots of upgrades) and help sell her. I am no longer her owner. You may wonder why she is named Betsey? Have you ever met a Betsey that wasn't nice, very appealing, soft to the touch and always performes with all her heart?

if needed my email address is below

a64pilot · Post by **a64pilot** » Fri Feb 26, 2010 2:32 pm

Never met a Betsey. Met a few Betsy's though.

210TC · Post by **210TC** » Fri Feb 26, 2010 3:57 pm

your not the only one who has made fun of me. Remember, FISdo? Actually, I first noticed this spelling on the nose of a WWII bomber. Don't know why. Google it

MauleMechanic · Post by **MauleMechanic** » Mon Nov 18, 2013 6:42 pm

Did you know there is a photo of B.D. flying a 210TC out of the hanger?

benflyn · Post by **benflyn** » Sat Dec 07, 2013 4:58 pm

#5 is up and going, pulling 42" + @ 8000' DA. on take off.

Nice!!

"Did you know there is a photo of B.D. flying a 210TC out of the hanger?"
Please post if possible.

Thanks

crbnunit · Post by **crbnunit** » Sun Dec 08, 2013 11:51 am

Oh OUCH Mauler! Those picutres make me a little sick! I know how long and how much money it takes to rebuild after something like that!

MauleMechanic · Post by **MauleMechanic** » Sun Dec 08, 2013 12:02 pm

benflyn wrote: Please post if possible.

Thanks

Brent was copying the photo two weeks ago...I forgot to follow through.

MauleMechanic · Post by **MauleMechanic** » Sun Dec 08, 2013 12:04 pm

Maybe he will get a better copy. This is the scan that looks awful

benflyn · Post by **benflyn** » Wed Feb 11, 2015 11:04 am

MauleMechanic wrote:Did you know there is a photo of B.D. flying a 210TC out of the hanger?

MM is it possible to get a nice picture of BD dewing this?

Also which one did he do this with, there were only ten made.

Kirk · Post by **Kirk** » Wed Feb 11, 2015 12:31 pm

think they are for sale on the Maule factory web site.

Kirk

maules.com · Post by **maules.com** » Wed Feb 11, 2015 12:57 pm

There are photos taken of other than M5 flying out of the hangar also.

MauleMechanic · Post by **MauleMechanic** » Wed Feb 11, 2015 2:20 pm

As you can tell, this was a balled up piece of copied paper. It is all I have. try to contact Brent.

Turbo Maule's

Who is online