I want two, please!
- DeltaRomeo
- 100+ Posts
- Posts: 410
- Joined: Thu Aug 27, 2015 3:05 am
- Contact:
- Chris in Milwaukee
- 100+ Posts
- Posts: 463
- Joined: Wed Dec 21, 2016 10:24 am
- Location: Wisconsin
- Contact:
- Mog
- 100+ Posts
- Posts: 979
- Joined: Fri Nov 26, 2010 8:01 pm
- Location: Dallas, TX
- Contact:
- DeltaRomeo
- 100+ Posts
- Posts: 410
- Joined: Thu Aug 27, 2015 3:05 am
- Contact:
- chazdevil
- 100+ Posts
- Posts: 222
- Joined: Fri Sep 18, 2009 10:31 am
- Location: gone flying
- Contact:
- Stinger
- 100+ Posts
- Posts: 207
- Joined: Mon Sep 15, 2014 3:44 am
- Location: OKC/2OK7
- Contact:
-
- Posts: 27
- Joined: Thu May 25, 2017 11:03 pm
- Location: North Pole, AK
- Contact:
-
- 100+ Posts
- Posts: 1665
- Joined: Mon Feb 11, 2008 10:31 am
- Contact:
- Chris in Milwaukee
- 100+ Posts
- Posts: 463
- Joined: Wed Dec 21, 2016 10:24 am
- Location: Wisconsin
- Contact:
- DeltaRomeo
- 100+ Posts
- Posts: 410
- Joined: Thu Aug 27, 2015 3:05 am
- Contact:
- CaseyM
- 100+ Posts
- Posts: 185
- Joined: Sun Jul 02, 2017 8:21 pm
- Location: Belmont NC
- Contact:
I spoke to Brent Maule shortly before SnF and I asked him about the laser etched door handles.
He says Maule has a local company that does laser etching and the door handles will be available as an upgrade in the near future.
I did not ask him about the door plates (I had not yet seen them at that time) but I feel pretty confident they could be had also.
He says Maule has a local company that does laser etching and the door handles will be available as an upgrade in the near future.
I did not ask him about the door plates (I had not yet seen them at that time) but I feel pretty confident they could be had also.
N1042Z
97' MX7-180C
97' MX7-180C
- crbnunit
- 100+ Posts
- Posts: 1890
- Joined: Tue Mar 18, 2008 12:42 pm
- Location: Alaska
- Contact:
- mauledrvr
- Posts: 77
- Joined: Wed Nov 22, 2006 7:35 pm
- Location: Green Mtns. VT
- Contact:
Who is online
Users browsing this forum: No registered users and 16 guests