Brother (C-175) and I (MT-7-235) went into Salmon Bar (762' runway, had some rafters judging our landings), Krassel, Cabin Creek, Vines, Big Creek for a great breakfast and Mile Hi just to pucker us up a bit. Mile Hi was a new experience landing up hill looking at more sky than anything on approach and taking off wasn't much better just run her off the side and hope you picked the correct line.
Another great couple days of flying.
ID Backcountry
-
- Posts: 6
- Joined: Fri Sep 13, 2019 11:55 am
- Location: Wenatchee, WA
- Contact:
-
- Posts: 47
- Joined: Mon Dec 17, 2012 9:02 pm
- Location: Mcalester
- Contact:
Re: ID Backcountry
I made a post in the Skylark Association about this post as interesting airplanes flying together wondering what mods the C175 had to be able to fly into those strips with your Maule. Les
Flyrider
-
- 100+ Posts
- Posts: 515
- Joined: Tue Dec 05, 2006 5:48 pm
- Contact:
Re: ID Backcountry
wondering what mods the C175 had to be able to fly into those strips with your Maule.
Les, The Pilot!
Les, The Pilot!
- Hottshot
- 100+ Posts
- Posts: 995
- Joined: Mon Aug 28, 2006 1:41 pm
- Location: 4S3
- Contact:
Re: ID Backcountry
I think the 175 is very under rated and performs quite well.one of these days im going to have a pane to play with again
Wup Winn
541-263-2968
Joseph Or, 97846
info@backcountryconnection.com
wup@maulesales.com
www.backcountryconnection.com
541-263-2968
Joseph Or, 97846
info@backcountryconnection.com
wup@maulesales.com
www.backcountryconnection.com
-
- Posts: 6
- Joined: Fri Sep 13, 2019 11:55 am
- Location: Wenatchee, WA
- Contact:
Re: ID Backcountry
C-175 has a Lycoming O-360 (180HP), stripped down interior just 2 seats for the most part, just had a Sportsman STOL leading edge installed by Stene in Polson, MT (great guys to work with up there) and I think 26" on the mains. He keeps about 50lbs in the back and that's about it. He's looking to put VG's on it next but as it is it performs very similar to my Maule. I out climb him but other than that not much of a difference. I have to admit I have tire envy of those 26"s every time I pull up beside him. I sure wish we could do something about that on our MT-7's.
Who is online
Users browsing this forum: No registered users and 25 guests