Seabiscuit Bakery now runs the cafe on the Mukilteo Coffee Roasters site. After some growing pains, they are now open 7 days a week. I popped in for coffee and a croissant the other day. Mmmmmm.
https://youtu.be/kLTzELNwrwk
Seabiscuit Bakery
- Flyhound
- 100+ Posts
- Posts: 414
- Joined: Sat Jan 05, 2013 12:04 pm
- Location: Port Townsend, WA
- Contact:
Seabiscuit Bakery
Por mares nunca dantes navegados - a line from a Potugese poem about exploring the unknown.
- andy
- Site Admin
- Posts: 1666
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
Re: Seabiscuit Bakery
Pilot heaven! Airstrip in the woods with a good coffee shop! The only airstrip that I ever landed at with good coffee in walking distance was Milford Sound on New Zealand's South Island.
Andy
1986 MX7-180
![Image](https://www.maulepilot.com/andy-small.jpeg)
1986 MX7-180
![Image](https://www.maulepilot.com/andy-small.jpeg)
- Flyhound
- 100+ Posts
- Posts: 414
- Joined: Sat Jan 05, 2013 12:04 pm
- Location: Port Townsend, WA
- Contact:
Re: Seabiscuit Bakery
Well, here's another coffee flight in my Maule. The San Juan Islands in Washington State are littered with airports, both public and private. They also have some good coffee venues near those runways. One of my favorite stops in the islands is Orcas Island's Eastsound airport. There's a nice gravel trail from the airport to town and it's only about a 1/2 mile walk to your choice of 3 coffee shops. I chose Olga Rising for my java fuel on this trip, but all of the options are great. Note my homemade electric tug pushing the plane out of the hangar. The material costs for this puppy were only ~ $350, and it works like a champ. My back has been thanking me for making this.
https://youtu.be/Wi8nyEPNcac
https://youtu.be/Wi8nyEPNcac
Por mares nunca dantes navegados - a line from a Potugese poem about exploring the unknown.
- gdflys
- 100+ Posts
- Posts: 283
- Joined: Wed Jul 24, 2013 11:31 pm
- Location: CT
- Contact:
Re: Seabiscuit Bakery
Were those muffins or fruit cakes?
Thanks for sharing.
![Laughing :lol:](./images/smilies/icon_lol.gif)
Greg Delp
1979 M-5-235C
CT
ATP, CFI, A&P/IA
1979 M-5-235C
CT
ATP, CFI, A&P/IA
-
- Posts: 47
- Joined: Fri May 05, 2017 1:52 pm
- Location: NC
- Contact:
Re: Seabiscuit Bakery
Any documentation on the tug build? I have been thinking about doing one alsoFlyhound wrote: ↑Tue Feb 14, 2023 10:27 amWell, here's another coffee flight in my Maule. The San Juan Islands in Washington State are littered with airports, both public and private. They also have some good coffee venues near those runways. One of my favorite stops in the islands is Orcas Island's Eastsound airport. There's a nice gravel trail from the airport to town and it's only about a 1/2 mile walk to your choice of 3 coffee shops. I chose Olga Rising for my java fuel on this trip, but all of the options are great. Note my homemade electric tug pushing the plane out of the hangar. The material costs for this puppy were only ~ $350, and it works like a champ. My back has been thanking me for making this.
https://youtu.be/Wi8nyEPNcac
- Flyhound
- 100+ Posts
- Posts: 414
- Joined: Sat Jan 05, 2013 12:04 pm
- Location: Port Townsend, WA
- Contact:
Re: Seabiscuit Bakery
My hand-truck electric tug started out as a rough idea based on a tug someone else made from a shovel. I did a quick preliminary design in CAD and then started shopping for materials. My initial material list had to be modified to accommodate what was available off-the-shelf from Home Depot.whittakrew asked: Any documentation on the tug build? I have been thinking about doing one also
I also made one change to the airplane under a 337 with my mechanic. There is a large washer under the bolt that connects the tailwheel assembly to the leaf spring. That washer was replaced with a small piece of angle iron. The vertical arm of the angle had an extra hole drilled in it to tie the plane down. That avoids getting the tiedown rope or strap smeared with grease from the tailwheel bearing.
The tug uses a ratcheting tiedown strap to pull the tailwheel onto the shelf of the hand-truck. The ratchet of the strap bolts to the tug on a crosspiece near the handle. The strap routes under a round steel tube welded to the lower frame so it pulls the tailwheel straight back. It works pretty darned well. It’s easier if you raise the tailwheel off the ground once it starts onto the shelf. Then the ratcheting strap just pulls the tug under the plane while the tailwheel rotates rather than pulling the whole plane back onto the tug.
The motor, controller, battery pack and throttle all came from the electric scooter world. There is lots of hardware to choose from on sites like: https://www.monsterscooterparts.com/trsc . My first setup used a 24 volt, 300 Watt motor, but I failed to read the small print. The motor only developed 300 Watts of power at 3,000 rpm. At low rpm, it didn’t have enough torque to move the plane. Well buggers! I figured out the required torque by attaching a pry bar to the tug’s wheels and measuring the torque required to move the plane. 10 foot-pounds was the answer. So, I wound up buying a 48 volt, 1 kW motor to get that amount of torque (it actually provides 13 foot pounds of torque at static rpm). That meant getting a new motor controller and throttle too. All of that came from the recreational electric scooter world.
I posted some pictures of the build process on backcountrypilot.org. Here’s the link if you are interested:
https://backcountrypilot.org/forum/best ... r#p346859
One of these days, I might pull together an “as-built” set of drawings and a material list, but it isn’t a high priority for me.
Por mares nunca dantes navegados - a line from a Potugese poem about exploring the unknown.
Who is online
Users browsing this forum: No registered users and 52 guests