dropped in at Gary's place
- gbarrier
- 100+ Posts
- Posts: 1562
- Joined: Thu Jul 14, 2011 5:41 pm
- Location: 9NR4 North Carolina
- Contact:
- gbarrier
- 100+ Posts
- Posts: 1562
- Joined: Thu Jul 14, 2011 5:41 pm
- Location: 9NR4 North Carolina
- Contact:
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
Afraid I'll have to pass on tomorrow. I suddenly realized that I let my transponder certification lapse last month so the Maule is grounded until I get the transponder, pitot-static and altimeter certified. We use a guy from South Carolina who has a mobile test station and can do the certification in the hangar.
Andy
1986 MX7-180
1986 MX7-180
- captnkirk
- 100+ Posts
- Posts: 942
- Joined: Wed Dec 25, 2013 4:54 pm
- Location: Cherryville NC
- Contact:
Bummer I had my done early at the last annual to get it in sync with future annuals it had been done at an odd time. My mechanic tries to have a couple lined up so the tech can spread the travel time around. I still plan on coming not sure about the wife. She has a cousin coming into town and wants to do a few things before he gets here. I let a few buddy's know (non Maule types) we'll see if they make it.
Kirk Johnson
If god had meant man to fly he would have given him more money
If god had meant man to fly he would have given him more money
- gbarrier
- 100+ Posts
- Posts: 1562
- Joined: Thu Jul 14, 2011 5:41 pm
- Location: 9NR4 North Carolina
- Contact:
-
- 100+ Posts
- Posts: 422
- Joined: Sun Feb 03, 2013 7:10 pm
- Contact:
- gbarrier
- 100+ Posts
- Posts: 1562
- Joined: Thu Jul 14, 2011 5:41 pm
- Location: 9NR4 North Carolina
- Contact:
- captnkirk
- 100+ Posts
- Posts: 942
- Joined: Wed Dec 25, 2013 4:54 pm
- Location: Cherryville NC
- Contact:
Well call me anything but late for lunch. I had to defrost in MSP this am so ended up a bit late but made it in time for the second seating. Va maule brought his lovely wife it was great meeting and putting a face with the avatar.
Looking forward to doing it again and hopefully more can make it. Anyway sure have a great group flying these Maule's.
Looking forward to doing it again and hopefully more can make it. Anyway sure have a great group flying these Maule's.
Kirk Johnson
If god had meant man to fly he would have given him more money
If god had meant man to fly he would have given him more money
- gbarrier
- 100+ Posts
- Posts: 1562
- Joined: Thu Jul 14, 2011 5:41 pm
- Location: 9NR4 North Carolina
- Contact:
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
- captnkirk
- 100+ Posts
- Posts: 942
- Joined: Wed Dec 25, 2013 4:54 pm
- Location: Cherryville NC
- Contact:
- gbarrier
- 100+ Posts
- Posts: 1562
- Joined: Thu Jul 14, 2011 5:41 pm
- Location: 9NR4 North Carolina
- Contact:
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
Richard at Carolina Avionics, Gary?
He just did my IFR systems certification. He came to Hickory and did it in the hangar.
I may use them to swap out my KT 76A transponder for the Appareo ESG ADS-B transponder when it finishes getting certified. They're one of the few Appareo dealers in the area.
He just did my IFR systems certification. He came to Hickory and did it in the hangar.
I may use them to swap out my KT 76A transponder for the Appareo ESG ADS-B transponder when it finishes getting certified. They're one of the few Appareo dealers in the area.
Andy
1986 MX7-180
1986 MX7-180
- gbarrier
- 100+ Posts
- Posts: 1562
- Joined: Thu Jul 14, 2011 5:41 pm
- Location: 9NR4 North Carolina
- Contact:
Yep, Richard drove right up and did the cert in my dirt floor hangar. At least I had electricity for him this year. We had to fire up the generator to do the champ last year.
Have known Gary up there forever. He was covered up first of January when I asked him about a KT74 by end of January when I needed certification. We agreed I would mail order the transponder, do the plug and play install entry so Richard could do the cert. and then they would do the ADS-B hookup in a couple of months when they dig out. Won't find many shops that would do that for you.
Have known Gary up there forever. He was covered up first of January when I asked him about a KT74 by end of January when I needed certification. We agreed I would mail order the transponder, do the plug and play install entry so Richard could do the cert. and then they would do the ADS-B hookup in a couple of months when they dig out. Won't find many shops that would do that for you.
- captnkirk
- 100+ Posts
- Posts: 942
- Joined: Wed Dec 25, 2013 4:54 pm
- Location: Cherryville NC
- Contact:
Richard is the one that did mine also at Compass. John had a couple lined up so I had mine done during the annual. I need to go talk to them about that apparreo unit along with the audio panel I want to replace. Twin Lakes is where I sent my kx155 and I want to see if they can give me a price also. Just been waiting for certification
Kirk Johnson
If god had meant man to fly he would have given him more money
If god had meant man to fly he would have given him more money
Who is online
Users browsing this forum: No registered users and 21 guests