Hi all-
I just put a deposit down on a plane am looking for help with a pre-buy.
thank you!
Matt
pre-buy
-
- Posts: 17
- Joined: Sun Aug 16, 2020 9:49 am
- Contact:
pre-buy
Last edited by bentmettle on Tue Dec 01, 2020 1:16 pm, edited 3 times in total.
- norcal64d
- 100+ Posts
- Posts: 133
- Joined: Mon Apr 29, 2019 6:08 am
- Location: Burlington, VT
- Contact:
Re: central NH pre-buy
I didn't end up using him but another forum member recommended Paul Zanis in Moultonboro NH 5M3 to me for a prebuy. Said he did his prebuy and maintenance on his M-7 for several years.
Tim
1991 MX-7-180
1991 MX-7-180
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
Re: central NH pre-buy
I have a CFII friend who flew with a guy who owned a M4 or M6 in Franconia NH. I flew in it with him once. Chances are it's not the one that you're looking at but if you give me the tail number, I'll check with my friend. If it turns out to be the same airplane, then my friend may be able to give you some feedback.
Andy
1986 MX7-180
![Image](https://www.maulepilot.com/andy-small.jpeg)
1986 MX7-180
![Image](https://www.maulepilot.com/andy-small.jpeg)
-
- Posts: 17
- Joined: Sun Aug 16, 2020 9:49 am
- Contact:
Re: central NH pre-buy
I’d read through the forum a bit earlier talked to Paul a bit on the phone. It was a helpful discussion but ultimately I’ll need to work with someone that can go to the plane more readily.
Last edited by bentmettle on Tue Dec 01, 2020 1:15 pm, edited 1 time in total.
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
Re: central NH pre-buy
Franklins are good engines and these days parts aren't as hard to get from Jewett TX since the company re-formed and is now a USA company. They are rare enough that many mechanics are not familiar with them. Your biggest challenge may be to find a mechanic who has worked on them before. Overhaul sources are more limited than Lycoming or Continental but Southern Aero in SC does them. No idea what a major overhaul costs there. Franklins have a reputation for running smoother and at higher RPM than Lycomings or Continentals.
Andy
1986 MX7-180
![Image](https://www.maulepilot.com/andy-small.jpeg)
1986 MX7-180
![Image](https://www.maulepilot.com/andy-small.jpeg)
Who is online
Users browsing this forum: No registered users and 10 guests