Does the Power Tow 40 work with the Scott tailwheel on my M-5?
https://www.powertow.com/40-EZ-Aircraft-Tug_p_14.html
Power Tow Advice
-
- Posts: 10
- Joined: Wed Jan 25, 2023 4:20 pm
- Contact:
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
Re: Power Tow Advice
They have an adapter for the MX-7 with a Scott tail wheel under "Additional Aircraft". If it works on a MX-7 then it should work on your M-5 with a Scott tail wheel. I know someone who had one for a M-6. The issue is the adapter since it has to put the engine and wheel far enough back and low enough to miss the elevators. I have a Best Tugs A3 and it works well on my MX-7-180.
Andy
1986 MX7-180
1986 MX7-180
- TomD
- 100+ Posts
- Posts: 1361
- Joined: Sat Aug 26, 2006 7:13 pm
- Location: Seattle area ( S43 )
- Contact:
Re: Power Tow Advice
Yep. I have a Powertow 40EZ that I use to move my M5-235C w/ Scott tailwheel. What you need is the KIT-0704 for the Scott tailwheel.
They also make the "Thunderbolt" which uses a battery to drive an electric motor. Frame and connectors look about the same.
They work well.
They also make the "Thunderbolt" which uses a battery to drive an electric motor. Frame and connectors look about the same.
They work well.
Who is online
Users browsing this forum: No registered users and 19 guests